© LAMATEK, Inc. | www.lamatek.com | 1-800-LAMATEK (local 856-599-6000)Technical Data Sheet
A65-005
Removable Adhesive System
Description
- Designed for use where temporary mounting to substrates is desired
- Removes with no residue*
- Dual Adhesive system with low adhesion formula on liner side
- Supplied in densified Kraft liner
Physical Properties
Physical Property
Test Method
Unit
Value
Thickness: Carrier & Adhesives
PSTC 133
mils
3.4
Peel Adhesion (Liner Side):
2 Mil PET, Initial, 180°, 12” min, SS
PSCT-101, ASTM D-3330, STD-10
PLI
1.3
Peel Adhesion (Unwind Side):
2 Mil PET, Initial, 180°, 12” min, SS
PSCT-101, ASTM D-3330, STD-10
PLI
8.1
Loop Tack (Liner Side):
2 Mil PET, 180°, 20” min, SS
PSTC-16, STD-7
PLI
1.3
Loop Tack (Unwind Side):
2 Mil PET, 180°, 20” min, SS
PSTC-16, STD-7
PLI
5.0
Static Shear (Liner Side):
2 Mil PET, 1” ², 1000g
PSTC-107, ASTM D3654, STD-9
Min. to Fail
>150
Static Shear (Unwind Side):
2 Mil PET, 1” ², 1000g
PSTC-107, ASTM D3654, STD-9
Min. to Fail
>250
Minimum Application Temperature
°F
50
Max. Continuous Operating Temperature
°F
125
Max. Intermittent Operating Temperature
°F
150
Surface Preparation: Surface to which the tape is applied must be clean, dry and free of grease and oil.
Bond strength is depending upon amount of adhesive to surface contact developed.
Different pressure, time and temperature on different surfaces will achieve different performance
Storage and Shelf Life: One year when stored at 64-72° F and 30-70% relative humidity, out of direct sunlight.
*Removability is dependent on application and surface conditions; user must test for suitability in each specific application.
PLEASE NOTE THAT ALL DATA SHEETS ARE SUPPLIED BY LAMATEK, INC. WITH THE UNDERSTANDING THAT THE PURCHASER MUST DETERMINE THE SUITABILITY OF A PARTICULAR PRODUCT FOR ITS INTENDED PURPOSE. UNLESS OTHERWISE STATED, LAMATEK, INC. CANNOT WARRANT PRODUCTS IN THEIR APPLICATION.
