Larger view
Contact us
for product samples or to
request a quote!
Contains 30% Post-Industrial
Recycled Content
100% RECYCLABLE
|
 |
 |
- Function:
-
LAMATEK Eco-Blocks™ are made from a proprietary Polyvinyl Chloride grade specifically developed for this application. Eco-Blocks™ contain 30% post-industrial recycled content and are 100% recyclable. Only LAMATEK has the tested product that will meet your stringent application needs, save you money, and help preserve the planet.
- Compatibility:
-
Eco-Blocks™ have been tested and found to be compatible with glazing and insulated glass (IG) sealants. Please contact LAMATEK for specific test information.
- Application:
- A minimum of two Eco-Blocks™ should be placed on each edge of the sash, serving to distribute weight evenly. The dimensions of the setting block are determined by the width and length of the IG unit. Larger panes require larger blocks. The gauge (thickness) of the setting blocks should be consistent on all four sides of the sash in order to promote even displacement.
- Put-Up:
- LAMATEK's Eco-Blocks™ are supplied with or without adhesive and kiss-cut on 3” cores. Eco-Blocks™ are also available without adhesive, die-cut and bulk packaged in cartons. Rolls are typically 12” in diameter, 13” in height, and weigh 55 lbs on average.
LAMATEK also offers customized options such as supplying Eco-Blocks™ on pads or half rolls for easier handling, cutting wavy edges to quickly differentiate between like-sized blocks, using special cuts to simulate molded parts and much more. Ask LAMATEK about your custom needs.
| TECHNICAL SPECIFICATIONS |
| Physical Property | Test Method | Standard |
| Durometer, Shore A |
ASTM D2240 |
85 +/- 5 |
| Elongation |
ASTM D412 |
100% min. |
| Tensile Strength |
ASTM D412 |
400 psi (min.) |
| Oil Resistance |
ASTM D471-06 |
<10% Volume Change |
| Compatibility with PSAs |
ASTM D413-98 (O2) e1 |
Pass after 72 hrs. Exposure |
| Compatibility with Silicone Glazing Sealant |
ASTM C1087 |
Pass (Dow, GE and Tru Seal) |
| Heat Aging |
ASTM D573 |
| I. |
Ultimate Elongation Change |
- 88% |
| II. |
Ultimate Tensile Change |
+ 52% |
| III. |
Shore A Durometer Points Change |
+ 1 Point |
| Dimensional Stability |
ASTM D1204 |
| I. |
Parallel Direction |
- 0.34% |
| II. |
Transverse Direction |
+ 0.014% |
|
|
|
|
| LAMATEK carries many lines of products designed for
specific market needs. If you don't see your market listed, please contact us today
to see how LAMATEK can help meet your exact requirements. |
|
|
| LAMATEK utilizes a nationwide network of industry specific sales
representatives for fast, personal service? |
|
|
|
In terms of annual average sunshine, the sunniest recorded place on Earth is Yuma, Arizona with 4,300 hours per year.
|
|
|
|
Reason #7: Vendor consolidation means less paperwork for you and your accounting department.
|
|
 |
|
